Reinforced Mounting Bracket | Custom Molded Ribbed Support

A reinforced mounting bracket molded to your 3D file, for a machine face or a housing.

– Spine — one height down the middle
– Lattice — the openings break clean on every edge
– Corner pads — the inserts sit square to the face
– Edges — trimmed flush, so the bracket lies flat
– First article gauged — checked against your 3D file

Send an inquiry
You may add material , quantity or other requirements here.

Overview

A reinforced mounting bracket is a molded plate that carries a part on a machine face. A solid spine runs down the middle of the part and ribs ring the outside, so the bracket holds its line across the span. A lattice of openings sits between the spine and the ribs, the four corner pads take metal inserts, and one edge is cut with a port for the cable behind it.

Our plastic mounting bracket is molded in glass filled nylon as a plain plate, and our angle bracket closes a corner, while a reinforced mounting bracket is molded with a spine and a lattice for a housing. The junction box takes its inserts at the corners; here the inserts sit in the mounting pads.

Key Features & Benefits

  • Spine — one height down the middle of the part
  • Lattice — the openings break clean on every edge
  • Corner pads — the inserts sit square to the face
  • Ribs — the outer wall holds the part over its span
  • One piece — the spine, the ribs and the pads come off one mold

Because a reinforced mounting bracket is molded to your 3D file, the spine, the pads and the port repeat cavity to cavity.

Customization Options

Outline, thickness, spine width, opening layout, insert placement and color all come from your 3D file, so a reinforced mounting bracket is molded for the housing you build.

  • Outline — curve and corner set to your 3D file
  • Inserts — metal inserts placed where your fixings land
  • Openings and port — count and shape as you set, cut where the cable runs
  • Marking — lettering molded into the face from your artwork
  • Color — a black grade, a shade you match or a two-tone split

Quality & Delivery

Tooling for a reinforced mounting bracket is cut in our own shop, and the first article of every bracket is gauged against your 3D file — outline, spine height, pad position and insert seat — before the run is released.

Mold faces are finished to the sheen your 3D file calls for, the gate is trimmed flush with the wall, and the openings come off the mold clean. Lead time is quoted with the unit price and held to the date, and each batch is gauged before packing.

We mold each reinforced mounting bracket to your 3D file, so the spine, the lattice and the pads follow the model. Send the 3D file and we return a quotation with the tool cost and the unit price.

Related Capabilities

Fixing parts sit beside this reinforced mounting bracket. The u-shaped bracket is molded as a channel with an eye boss, and the four wing bracket spreads over four arms on a molded support.

Tooling and molding both run in house — on our mold making floor and our injection molding service presses. Send your 3D file for a quotation.

Scroll to Top
You may add material , quantity or other requirements here.